Offloading Service-Policy On Bundle Access Port - Cisco ASR 9000 Series System Configuration Manual

Offloading Service-policy on Bundle Access Port

Command or Action
Step 9
end-policy-map
Example:
RP/0/RSP0/CPU0:router(config-pmap)#
end-policy-map
Step 10
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface
gigabitethernet 100/0/0/0
Step 11 l2transport
Example:
RP/0/RSP0/CPU0:router(config-if)# l2transport
Step 12 nv
Example:
RP/0/RSP0/CPU0:router(config-if)# nv
Step 13 service-policy input policy-map
Example:
RP/0/RSP0/CPU0:router(config-if-nV)#
service-policy input policy1
Step 14
commit
Offloading Service-policy on Bundle Access Port
Perform these tasks to offload the service-policy on the bundle access port. This procedure offloads the
service-policy in the ingress direction of the Satellite Ethernet interface.
Cisco ASR 9000 Series Aggregation Services Router nV System Configuration Guide, Release 5.3.x
80
Configuring QoS on the Satellite System
Purpose
Ends the policy map configuration.
Configures an interface and enters the interface configuration
mode.
(Optional)
Configures the L2 transport offload for satellite.
Enters the satellite network virtualization (nV) configuration
submode.
Attaches a policy map to an input interface to be used as the
service policy for that interface.