GE 28031xx2 User Manual page 45

28031 series 5.8 ghz cordless handset speakerphone/answering system
Hide thumbs Also See for 28031xx2:
Table of Contents

Advertisement

MESSAGE WAITING
MSG WAITING OFF
NEW CALL XX
NO BATTERY
NO CALLS
NO DATA
NO USER MEMORY
OUT OF RANGE
PAGING or
PAGING FROM
REPT
SEARCHING
SPKR
UNKNOWN CALLER/ Indicates incoming call is from an area not serviced by CID or
NAME/NUMBER
h
s
AnDset
ounD
Signal
A long warbling tone (with ringer on)
Three short beeps
One long beep
One short beep (every 7 seconds)
One short beep (during room monitoring)
Indicates voice mail has not been retrieved from service
provider.
Indicates voice mail has been retrieved from service provider.
XX represents the number of new CID records not reviewed.
Indicates the battery is not properly installed in the handset,
or the battery pack is not properly connected to the jack inside
the battery compartment.
Indicates there are no CID records in memory.
Indicates no CID information was received , you are not
subscribed to CID service, or CID service is not working.
Indicates the memory location contains no user memories and
the user is trying to mark a specific user record for VIP MELODY.
Indicates handset is too far away from the base. Move closer
to the base.
Someone pressed the PAGE button on the base or INTERCOM
button on the handset
Indicates a repeat call message. Indicates a new call from the
same number was received more than once.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone mode.
the CID information was not sent.
s
iGnAls
Meaning
Signals an incoming call
Page signal
Confirmation tone for the completion
of a function
Low battery warning
Ring alert tone
45

Advertisement

Table of Contents
loading

Table of Contents