GE 28031xx2 User Manual page 34

4. Press the DELETE button to mark the record for deletion. The display shows
DELETE?
5. Press the DELETE button to delete the record. DELETED shows in the display.
NOTE: If you don't want to change or delete a record, simply press the *EXIT
button, or wait for one minute to exit the review mode automatically.
D n
iAlinG A umBer from
1. Make sure the phone is ON (in talk mode) by pressing the TALK/CALL BACK or
SPEAKER button.
2. Press the MEMORY button to display MEMO # - -.
3. Use the touch tone pad to enter the memory location number. The number dials
automatically.
-OR-
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50.
3. Press the memory location for the phone number you want to dial, or use the
CALLER ID-VOLUME ( 6 or 5) button to scroll to the number you want to dial.
4. Press the TALK/CALL BACK or SPEAKER button. The number dials automatically.
c D
hAin iAlinG from
Use this feature to make calls from records stored in memory which require a
sequence of numbers, such as a calling card number used for a frequently called
long distance number. The following example shows how you can store each part of
the dialing sequence and use chain dialing to make a call through a long distance
service:
The Number For
Long Distance Access Number
Authorization Code
Frequently called long distance number
1. Make sure the phone is ON (in talk mode) by pressing the TALK/CALL BACK or
SPEAKER button.
2. Press the MEMORY button, and then press 07.
3. When you hear the access tone, press the MEMORY button, and then press 08.
4. At the next access tone, press the MEMORY button and then 09.
4
m
emorY
m
emorY
Memory Location
7
8
9