Table of Contents
Advertisement
A
nswerinG
This section shows you how to set up your answering system to receive incoming
calls. Before you begin the set up process, you must turn on the answering system.
• Press the
ANS ON/OFF
The MESSAGES indicator lights when the answering system is on. The indicator
blinks when you have new messages.
NOTE: The answering system displays "- -" when it is off.
s
v
ettinG the
The default voice prompt language is English.
To change the answering system's voice prompt language,
• Press the LANGUAGE button on
prompt. The unit announces "OPTION FRANCAISE " and Fr shows in the message
counter.
• Press the LANGUAGE button again to change to the SPANISH voice prompt. The
unit announces "SELECCION ESPANOL" and SP shows in the message counter.
NOTE: To change to English, press the LANGUAGE button again.
NOTE: In remote access mode, the system follows the selected language. The
voice prompt language cannot be switched remotely.
v
t
/D
oice
ime
1. Make sure the answering system is ON.
2. Press and hold the DAY/CHECK button to set the day of the week.
3. Press and hold the HOUR button to set the hour (a.m. or p.m.). Example: 12AM, 1AM,
or 12PM, 1PM.
4. Press and release the MIN button to advance the clock in one minute intervals.
Press and hold to increase by 5-minute increments.
5. After the time is set, the real time clock will be displayed on the handset within 1
minute.
NOTE: You must set the day manually. You may choose to set the time manually
as well though the time is automatically transmitted by your local phone
company as part of Caller ID service. If you subscribe to Caller ID service, the
current time is set automatically when you receive your first CID record.
s
s
Ystem
etup
button to turn the answering system on and off.
p
oice
rompt
front
s
AY
tAmp AnD
l
AnGuAGe
of base to change to the FRENCH voice
r
t
c
eAl
ime
lock
1
Advertisement
Table of Contents
