Table of Contents
Advertisement
3. Use the CALLER ID-VOLUME ( 6 or 5) button to scroll to desired redial number.
4. Press MEMORY button to display SELECT MEMORY 01 - 50.
5. Use touch-tone pad to enter two digit desired memory location (01 through 50).
Press MEMORY button. Display will show ENTER NAME.
6. Follow step 5 in the "Storing a Name and Number in Memory" section to enter
name.
NOTE: If the memory location is occupied, REPLACE MEMO? is displayed, and
you must confirm replacement by pressing the MEMORY button.
7. Press MEMORY button to save.
8. To enter another name and number in a different memory location, return to step
2 and repeat the process.
NOTE: If the redial number has more than 20 digits, it cannot be stored in
memory.
i
p
nsertinG A
n
)
umBer
Press the #PAUSE/RINGER button on the handset's touch-tone pad to insert a delay
in dialing sequence when a pause is needed to wait for a dial tone (for example, after
you dial 9 for an outside line, or to wait for a computer access tone.) Each pause
counts as one digit in the dialing sequence.
r
r
eviewinG
ecorDs
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50.
3. Press the CALLER ID-VOLUME ( 6 or 5) buttons to scroll the records, or use the
handset's touch-tone pad to enter the memory location number.
c
r
hAnGinG
ecorDs
Follow the procedure for Storing Names and Numbers in Memory, except replace a
stored telephone number with a new one.
D
r
eletinG
ecorDs
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50.
3. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the record you want to
delete or use the touch-tone pad to enter the desired memory location.
D
Ause in the
s
toreD in
s
toreD in
s
toreD in
s
iAlinG
equence
m
emorY
m
emorY
m
emorY
(
s
of A
toreD
Advertisement
Table of Contents
