Table of Contents
Advertisement
display.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the
new area code shows in the display.
NOTE: To restore the default setting to - - -, press and release DELETE when
SET AREA CODE shows in the display.
r
eGistrAtion
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
From the Handset Setup Menu:
1. If necessary, press the MUTE/PROG button to go to the REGISTRATION menu. The
default is 2NO.
2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CALLER ID-VOL
(- or +) button to scroll to 1YES or 2NO.
3. If you select 1YES, press the MUTE/PROG button to confirm your selection. HOLD
BASE PAGE WAIT FOR BEEP shows in the display. (Your handset should be held
near the base during registration process.)
4. Press and hold the page button on the base unit until you hear a long tone at the
handset. HANDSET X REGISTERED shows in the handset display, where X is the
handset number.
D
-r
e
eGistrAtion
De-registration cancels registration. During the de-registration process, keep the
handset near the base.
From the Handset Setup Menu:
1. If necessary, press the MUTE/PROG button to scroll to the DEREGISTRATION menu.
The default is 2NO.
2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CALLER ID-
VOLUME ( 6 or 5) button to scroll to 1YES or 2NO.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
3. Select NO, if you do not want to de-register.
4. If you select 1YES, press the MUTE/PROG button and MOVE NEAR TO BASE displays
for 2 seconds, then CONFIRM? 1YES 2NO appears in the display.
21
Advertisement
Table of Contents
