GE 28031xx2 User Manual page 36

l m
eAvinG A essAGe
1. After the answerer gets the line and plays the outgoing announcement, the
caller can enter the mailbox number (1, 2 or 3) during the play of outgoing
announcement or within the 2 seconds after the end of outgoing announcement
and then leave a message in that specific mailbox.
2. If there is no entry of mailbox number during that period, then your message will
be left in the default mailbox 1.
s c
creeninG Alls from the
1. When the answering system answers the call, listen while the caller leaves a
message (to determine who is calling).
2. To speak to the caller, pick up the handset, and press the
SPEAKER button.
The answering system automatically stops recording when you activate the handset
or pick up an extension phone.
TIP: Make sure the volume on the base is set loud enough to hear your
incoming calls.
m i
AilBoX nDicAtor
The mailbox button/indicators inform you of messages for each individual mailbox
and whether they are new or old.
Mailbox button/indicator is on; stored messages.
Mailbox button/indicator is off; no messages.
Mailbox button/indicator is flashing; new messages.
m p
essAGes lAYBAck
The message counter and the base mailbox button/indicators (PLAY/STOP 1, 2 or 3)
let you know when you have message(s) or new message(s). To play the messages,
press the corresponding PLAY/STOP 1, 2 or 3 button.
While a message is playing, you may do the following:
• Press the corresponding PLAY/STOP 1, 2, or 3 button to stop the message
playback.
• Press and release the
• Press and release the
• Press and release the SKIP button to go to the next message.
• Press the DELETE

B
REV button to restart the current message.
REV button twice to go to the previous message.
button to erase the current message.
Ase
TALK/CALL BACK or