VTech LS6125 User Manual page 56

T roub lesh ooting
Problem Suggestion
The answering system • Make sure your remote access code is correct (page 30).
does not respond to
• Make sure you are calling from a touch-tone telephone. When dialing a number, there should
remote commands.
be tones. If there are clicks, then it is not a touch-tone telephone and cannot activate the
answering system.
• The answering system may not detect the remote access code when your announcement is
playing. Wait until the announcement is over before entering the code.
• There m ay b e interference on the telephone line y ou are u sing . P ress the d ial pad k ey s rm ly
when dialing.
Common cure for • If the telephone is not responding normally, try putting the cordless handset in the telephone
electronic equipment. base or the charger. If it does not respond, try the following (in the order listed):
• Disconnect the power to the telephone base.
• Disconnect the battery on the cordless handset.
• Wait a few minutes before connecting power to the telephone base.
• Re-install the battery and place the cordless handset in the telephone base.
• Wait for the cordless handset to synchronize its connection with the telephone base. Allow up
to one minute for this to take place.
w w w .v tech ph ones.com
53