VTech LS6125 User Manual page 109

Troub lesh ooting
Problem Suggestion
Caller ID entries do not • Although the call log entries you receive have 10 digits, (the area code plus the seven-digit
number), in some areas, you may need to dial only the seven digits, or a 1 plus the seven digits,
match the numbers I
need to dial. or a 1 plus the area code plus the seven digits. You can change the number of digits that you
dial from or store in the call log.
While reviewing the call log, press # repeatedly to display these dialing options for local and
•
long distance numbers before dialing or saving the telephone number.
CON N ECTIN G ... is
• The handset may be out of range. Move it closer to the telephone base.
shown in the handset
• The handset may be de-registered accidentally. Try to register the handset again.
display window. Why
Place the handset in the telephone base that is connected to a power outlet. If PRESS FIN D
1.
don't I get a dial tone
HS 4 SEC ON BASE does not appear on the screen after a few seconds, lift up the handset
when I try to use this
and place it in the telephone base again.
telephone?
Press and hold FIN D HAN DSET on the telephone base for four seconds. Release
2.
FIN D HAN DSET once the IN U SE light comes on.
After a while, the handset will emit a series of tones. The newly registered handset will be
assigned as HAN DSET when successfully registered. Repeat steps 1 and 2 if the handset is
not successfully registered to the telephone base within two minutes.
w w w .v tech ph ones.com
39