Reset Hwtacacs Statistics - HP FlexFabric 7900 Series Command Reference Manual

Usage guidelines
Make sure that the port number and shared key settings of the primary HWTACACS authorization server
are the same as those configured on the server.
Two authorization servers specified for a scheme, primary or secondary, cannot have identical IP address
and port number settings.
You can remove an authorization server only when it is not used for user authorization. Removing an
authorization server affects only authorization processes that occur after the remove operation.
For security purposes, all shared keys, including shared keys configured in plain text, are saved in
ciphertext.
Examples
# Specify the primary accounting server with IP address 10.163.155.13, TCP port number 49, and
plaintext shared key 123456TESTautr&! for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49 key simple
123456TESTautr&!
Related commands
• display hwtacacs scheme
key (HWTACACS scheme view)
•
• secondary authorization

reset hwtacacs statistics

Use reset hwtacacs statistics to clear HWTACACS statistics.
Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization }
Views
User view
Predefined user roles
network-admin
Parameters
accounting: Clears the HWTACACS accounting statistics.
all: Clears all HWTACACS statistics.
authentication: Clears the HWTACACS authentication statistics.
authorization: Clears the HWTACACS authorization statistics.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
Related commands
display hwtacacs scheme
62