Nas-Ip (Radius Scheme View) - HP FlexFabric 7900 Series Command Reference Manual

A plaintext shared key is a string of 15 to 64 characters that must contain digits, uppercase
letters, lowercase letters, and special characters.
Usage guidelines
The shared keys configured by using this command apply to all servers in the scheme. Make sure the
settings match the shared keys configured on the RADIUS servers.
The shared keys specified for specific RADIUS servers take precedence over the shared key specified with
this command.
For security purposes, all shared keys, including shared keys configured in plain text, are saved in
ciphertext.
Examples
# For RADIUS scheme radius1, set the shared key for secure accounting communication to ok in plain
text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key accounting simple ok
Related commands
display radius scheme

nas-ip (RADIUS scheme view)

Use nas-ip to specify a source IP address for outgoing RADIUS packets.
Use undo nas-ip to delete a source IP address for outgoing RADIUS packets.
Syntax
nas-ip ipv4-address
undo nas-ip
Default
The source IP address of an outgoing RADIUS packet is that specified by using the radius nas-ip
command in system view.
If the radius nas-ip command is not configured, the source IP address is the IP address of the outbound
interface.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies an IPv4 address, which must be an address of the device and cannot be 0.0.0.0,
255.255.255.255, a class D address, a class E address, or a loopback address.
Usage guidelines
The source IP address of the RADIUS packets that a NAS sends must match the IP address of the NAS that
is configured on the RADIUS server. A RADIUS server identifies a NAS by its IP address. Upon receiving
34