Display Ipsec Statistics - HP FlexFabric 7900 Series Command Reference Manual

display ipsec statistics

Use display ipsec statistics to display IPsec packet statistics.
Syntax
display ipsec statistics [ tunnel-id tunnel-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
tunnel-id tunnel-id: Specifies an IPsec tunnel by its ID in the range of 0 to 4294967295. You can use the
display ipsec tunnel brief command to view the IDs of established IPsec tunnels.
Usage guidelines
If you do not specify any parameters, this command displays statistics for all IPsec packets.
Examples
# Display statistics for all IPsec packets.
<Sysname> display ipsec statistics
IPsec packet statistics:
Received/sent packets: 47/64
Received/sent bytes: 3948/5208
Dropped packets (received/sent): 0/45
Dropped packets statistics
No available SA: 0
Wrong SA: 0
Invalid length: 0
Authentication failure: 0
Encapsulation failure: 0
Decapsulation failure: 0
Replayed packets: 0
ACL check failure: 45
MTU check failure: 0
Loopback limit exceeded: 0
# Display statistics for the packets of IPsec tunnel 1.
<Sysname> display ipsec statistics tunnel-id 1
IPsec packet statistics:
Received/sent packets: 5124/8231
Received/sent bytes: 52348/64356
Dropped packets (received/sent): 0/0
Dropped packets statistics
No available SA: 0
115