Sftp - HP FlexFabric 7900 Series Command Reference Manual

ip ip-address: Specifies a source IPv4 address.
Usage guidelines
When the client's authentication method is publickey, the client must get the local private key for digital
signature. Because the publickey authentication uses either RSA or DSA algorithm, you must specify an
algorithm (by using the identity-key keyword) in order to get the correct data for the local private key.
Examples
# Connect an SCP client to the SCP server 200.1.1.1, specify the public key of the server as svkey, and
download the file abc.txt from the server. The SCP client uses publickey authentication. Use the following
algorithms:
Preferred key exchange algorithm is dh-group14.
•
• Preferred server-to-client encryption algorithm is aes128.
Preferred client-to-server HMAC algorithm is sha1.
•
Preferred server-to-client HMAC algorithm is sha1-96.
•
Preferred compression algorithm between the server and client is zlib.
•
<Sysname> scp 200.1.1.1 get abc.txt prefer-kex dh-group14 prefer-stoc-cipher aes128
prefer-ctos-hmac sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib publickey svkey

sftp

Use sftp to establish a connection to an IPv4 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp server [ port-number ] [ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des
| aes128 | aes256 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 | des }
| prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] * [ dscp dscp-value | publickey keyname |
source { interface interface-type interface-number s | ip ip-address } ] *
In FIPS mode:
sftp server [ port-number ] [ identity-key rsa | prefer-compress zlib | prefer-ctos-cipher { aes128 |
aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128
| aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname | source { interface
interface-type interface-number s | ip ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
identity-key: Specifies the public key algorithm for the client, either dsa or rsa. The default is dsa. If the
server uses publickey authentication, this keyword must be specified.
200