Pre-Shared-Key - HP FlexFabric 7900 Series Command Reference Manual

To make sure only one IKE profile is matched for a peer, do not configure the same peer ID for two or
more IKE profiles. If you configure the same peer ID for two or more IKE profiles, which IKE profile is
selected for IKE negotiation is unpredictable.
For an IKE profile, you can configure multiple peer IDs. A peer ID configured earlier has a higher priority.
Examples
# Create IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
# Configure a peer ID with the identity type of FQDN and the value of www.test.com.
[Sysname-ike-profile-prof1] match remote identity fqdn www.test.com
# Configure a peer ID with the identity type of IP address and the value of 10.1.1.1.
[Sysname-ike-profile-prof1] match remote identity address 10.1.1.1
Related commands
local-identity

pre-shared-key

Use pre-shared-key to configure a pre-shared key.
Use undo pre-shared-key to remove a pre-shared key.
Syntax
pre-shared-key { address ipv4-address [ mask | mask-length ] | hostname host-name } key { cipher
cipher-key | simple simple-key }
undo pre-shared-key { address ipv4-address [ mask | mask-length ] | hostname host-name }
Default
No pre-shared key is configured.
Views
IKE keychain view
Predefined user roles
network-admin
Parameters
address: Specifies a peer by its address.
ipv4-address: Specifies the IPv4 address of the peer.
mask: Specifies the mask in dotted decimal notation. The default mask is 255.255.255.255.
mask-length: Specifies the mask length in the range of 0 to 32. The default mask length is 32.
hostname host-name: Specifies a peer by its hostname, a case-sensitive string of 1 to 255 characters.
key: Specifies a pre-shared key.
simple: Specifies a pre-shared key in plain text.
171