Authorization Default - HP FlexFabric 7900 Series Command Reference Manual

[Sysname-isp-test] authorization command local
# Configure ISP domain test to use HWTACACS scheme hwtac for command authorization and use local
authorization as the backup authorization method.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization command hwtacacs-scheme hwtac local
Related commands
authorization accounting (Fundamentals Command Reference)
•
hwtacacs scheme
•
local-user
•

authorization default

Use authorization default to specify the default authorization method for an ISP domain.
Use undo authorization default to restore the default.
Syntax
In non-FIPS mode:
authorization default { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
undo authorization default
In FIPS mode:
authorization default { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ]
[ local ] }
undo authorization default
Default
The default authorization method of an ISP domain is local.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform authorization. After passing authentication, FTP, SFTP and SCP users use the root
directory of the device as the work directory but cannot access to it, and other login users get the default
user role. For more information about the default user role, see Fundamentals Configuration Guide.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
10