Password-Control History - HP FlexFabric 7900 Series Command Reference Manual

times times: Sets the maximum number of times a user can log in after the password expires. The value
range is 0 to 10, and 0 means that a user cannot log in after the password expires.
Usage guidelines
This command is effective only on non-FTP login users. An FTP user cannot continue to log in after its
password expires.
Examples
# Specify that a user can log in five times within 60 days after the password expires.
<Sysname> system-view
[Sysname] password-control expired-user-login delay 60 times 5
Related commands
display password-control

password-control history

Use password-control history to set the maximum number of history password records for each user.
Use undo password-control history to restore the default.
Syntax
password-control history max-record-num
undo password-control history
Default
The maximum number of history password records for each user is 4.
Views
System view
Predefined user roles
network-admin
Parameters
max-record-num: Specifies the maximum number of history password records for each user. The value
range is 2 to 15.
Usage guidelines
When the number of history password records reaches the set maximum number, the subsequent history
record overwrites the earliest one.
The system stops recording passwords after you execute the undo password-control history enable
command, but it does not delete the prior records.
To delete the existing records, use one of the following methods:
Use the undo password-control enable command to disable the password control feature globally.
•
Use the reset password-control history-record command to clear the passwords manually.
•
Examples
# Set the maximum number of history password records for each user to 10.
<Sysname> system-view
[Sysname] password-control history 10
81