Sony HDCU2000 Operation Manual page 44

Hd camera control unit, (3g/hd sdi output expansion unit/ sd encoder unit/ multi interface unit)
Hide thumbs Also See for HDCU2000:
Table of Contents

Advertisement

CCU
CONFIGURATION
Page name
Page No.
<PROMPT/TRUNK 2>
C11
<VIDEO SETUP>
C12
<VIDEO ADJUST 1>
C13
(Available when a
HKCU1001 or HKCU1003
board is installed)
<VIDEO ADJUST 2>
C14
(Available when two
HKCU1001 or HKCU1003
boards are installed)
(Available when yet
another VDA board from
the HKCU1003 is installed
to the option slot)
44
Setup Menu
Item
Settings
NETWORK TRUNK
MODE
(OFF), OFF, NETWORK,
NETWORK + VIDEO
RATE
---, (100Mbps), (1Gbps)
HD PROMPTER
(ENABLE), (DISABLE)
FRAME SYNC
OFF, ON, (ON)
HD TRUNK
(ENABLE), (DISABLE)
SETUP
ON, OFF, ---
SD BLK CLP
OFF, ON
Q FILTER
WD, NA
G/Y SYNC
OFF, ON
VCS RELAY
OFF, ON
VBS
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
PIX
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
WFM
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
VBS
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
PIX
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
WFM
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
G/Y LEVEL
–99 to 99, 0
B/B-Y LEVEL
–99 to 99, 0
R/R-Y LEVEL
–99 to 99, 0
Description
Sets the mode for the network trunk.
Sets the rate for the network trunk line.
Displays "ENABLE" or "DISABLE" for HD
PROMPTER.
Turns the frame sync function ON/OFF.
Displays "ENABLE" or "DISABLE" for HD TRUNK.
ON: Adds a setup signal to VBS and SD YCD
component signal Ych-SYNC.
OFF: No setup signal is added.
---: Displayed when the format is PAL. (Display only)
Y signals from SD SDI output that are less than 0%
are clipped at 0%.
Sets the Q filter bandwidth. (Displayed only when
HKCU1001 or HKCU1003 is installed.)
Sets the R/G/B component signal's G ch-SYNC to
on/off. (Displayed only when HKCU1001 or
HKCU1003 is installed.)
Sets the PIX/WFM connector output. (Displayed only
when HKCU1001 or HKCU1003 is installed.)
Adjusts the VBS output video level.
Adjusts the PIX output video level.
Adjusts the WFM output video level.
Adjusts the VBS output video level.
Adjusts the PIX output video level.
Adjusts the WFM output video level.
Adjusts the G/Y output video level.
Adjusts the B/B-Y output video level.
Adjusts the R/R-Y output video level.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdcu2500Hkcu2007Hkcu1003Hkcu1001

Table of Contents