Sony HDCU2000 Operation Manual page 40

SYSTEM OPERATION
Page name
Page No.
<RETURN SETUP>
S07
<CCU VIDEO>
S08
<3D SETTINGS>
S09
40
Setup Menu
Item Settings
FRAME SYNCHRO OFF, ON
SD-RETURN
MATRIX OFF, ON
LB LINE 360, 364
ASPECT MANUAL, AUTO
RETURN-TO-RETURN
MODE NORMAL, SMOOTH
VBS-CHROMA OFF, ON
MONO-COLOR OFF, ON
PHASE 0 to 358, 0
SATURATION –99 to 99, 0
3D MODE OFF, ON
3D OUTPUT 3D MONITOR, RIGHT ONLY,
LEFT ONLY
3D MONITOR SPLIT SCREEN, SIDE BY SIDE,
ANAGLYPH, 50% MIX,
DIFFERENCE, DIFF Y ONLY,
MIRROR, CROP SPLIT, V SPLIT,
CHECKER BOARD, LINE BY LINE
POSITION –99 to 99, 0
MIX CHROMA ON, OFF
DIFF MODE L-R, R-L
V SPLIT MODE L/R, R/L
BORDER LINE OFF, ON
CHANNEL ID (OFF), (ON)
Description
Set the FRAME SYNCHRO function for the return
signal to on/off.
Turn the HD matrix to the SD return signal on/off.
Set the effective line setting for letterbox.
Sets the auto-linking function for this unit's aspect
setting.
"SMOOTH" is available when the return signal is HD-
SDI.
Turns the VBS output signal's cross signal on/off.
Sets the MONO COLOR function on/off.
Adjusts the color phase for the MONO COLOR
function.
Adjusts the color saturation for the MONO COLOR
function.
Turns the 3D Mode setting ON/OFF. (Available only
with the HDFA-200 expansion.)
Sets 3D Monitor output.
Displays the format.
Sets the WIPE division ratio and MIX mix ratio.
(Displayed when 3D MODE is set to ON.)
Selects whether to display chroma information when
MIX is activated.
Switches to the difference image calculation
operation.
Switches the left and right sides when splitting the
display.
Selects whether or not to display the boundary line
when splitting the display.
Selects whether to display the Channel ID with this
line's output.