Sony HDCU2000 Operation Manual page 38

SYSTEM OPERATION
Page name
Page No.
<SD ASPECT>
S05
<RETURN FORMAT>
S06
38
Setup Menu
Item Settings
SD ASPECT SQUEEZE, EDGE CROP, LETTER
BOX
SD LB SEL 16:9, 15:9, 14:9, 13:9
H-POSITION –99 to 99, (–99) to (99) 0
CENTER ON, OFF, (ON), (OFF)
V-POSITION –99 to 99, (–99) to (99) 0
CENTER ON, OFF, (ON), (OFF)
H-INTERP A, B, C, D, E
V-INTERP A, B, C, D, E
RET1 When 1.001 is selected for
FREQUENCY HD: 1080/59.94P,
RET2
1080/59.94I (PsF), 1080/23.97PsF,
RET3
720/59.94P, 525/59.94I (PsF),
NTSC
RET4
When 1.000 is selected for
FREQUENCY HD: 1080/50P,
1080/50I (PsF), 1080/24PsF, 720/
50P, 625/50I (PsF), PAL
When 525/59.94I (PsF), NTSC,
625/50I (PsF) or PAL are selected,
the following settings are available:
SQUEEZE, EDGE CROP, LETTER
BOX,
16:9, 15:9, 14:9, 13:9
AUTO SCAN Execute via EXEC.
LINK TO MAIN MANUAL/AUTO
Description
Selects the SD output aspect.
Selects the LETTER BOX aspect ratio.
Sets the horizontal position.
Settings in ( ): Displayed when SQUEEZE or
LETTER BOX is selected in SD ASPECT. (Display
only)
Sets the horizontal centering position.
Settings in ( ): Displayed when SQUEEZE or
LETTER BOX is selected in SD ASPECT. (Display
only)
Sets the vertical position.
Settings in ( ): Displayed when SQUEEZE or EDGE
CROP is selected in SD ASPECT. (Display only)
Sets the vertical centering position.
Settings in ( ): Displayed when SQUEEZE or EDGE
CROP is selected in SD ASPECT. (Display only)
Selects the down converter horizontal filter.
Selects the down converter vertical filter.
Sets the return signal input format.
Sets input format, aspect ratio, and letterbox mode.
The following page shows selectable RETURN
FORMAT settings at various OUTPUT FORMAT
settings.
Note
RET4 for HDCU2500 is locked to NTSC or PAL.
Automatically detects the return signal input format,
and then executes.
Note
If the automatically detected result is invalid, the
previous setting flashes for 5 seconds, and then the
previous setting is maintained.
Sets the mode for linking the return signal to this
signal.