Table of Contents
Advertisement
NO.
ITEM
5 * Front brake
6 * Rear brake
7 * Brake hose
8 * Brake fluid
9 * Wheels
10 * Tires
11 * Wheel bearings
12 * Swingarm
13
Drive chain
14 * Steering bearings
15 * Chassis fasteners
Brake lever pivot
16
shaft
Brake pedal pivot
17
shaft
Clutch lever pivot
18
shaft
Sidestand, center-
19
stand
20 * Sidestand switch
21 * Front fork
CHECK OR MAINTENANCE
JOB
• Check operation, fluid level
and vehicle for fluid leakage.
• Adjust brake lever free play.
• Replace brake pads.
• Check operation and adjust
brake pedal free play.
• Replace brake shoes.
• Check for cracks or damage.
• Check for correct routing and
clamping.
• Replace.
• Replace.
• Check runout, spoke tight-
ness and for damage.
• Tighten spokes if necessary.
• Check tread depth and for
damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
• Check bearings for loose-
ness or damage.
• Check operation and for
excessive play.
• Lubricate with lith-
ium-soap-based grease.
• Check chain slack, alignment
and condition.
• Adjust and lubricate chain
with a special O-ring chain
lubricant thoroughly.
• Check bearing play and steer-
ing for roughness.
• Lubricate with lith-
ium-soap-based grease.
• Make sure that all nuts, bolts
and screws are properly tight-
ened.
• Lubricate with silicone
grease.
• Lubricate with lith-
ium-soap-based grease.
• Lubricate with lith-
ium-soap-based grease.
• Check operation.
• Lubricate with lith-
ium-soap-based grease.
• Check operation.
• Check operation and for oil
leakage.
PERIODIC MAINTENANCE
ODOMETER READING
1000 km
10000 km
20000 km
(600 mi)
(6000 mi)
(12000 mi)
Whenever worn to the limit
Whenever worn to the limit
Every 50000 km (30000 mi)
Every 500 km (300 mi) and after washing the motorcycle, riding in the
rain or riding in wet areas
Every 20000 km (12000 mi)
3-2
30000 km
40000 km
(18000 mi)
(24000 mi)
Every 4 years
Every 2 years
ANNUAL
CHECK
Advertisement
Chapters
Table of Contents
Troubleshooting
