Installing The Engine - Yamaha SR400 2014 Service Manual

EAS23720

INSTALLING THE ENGINE

1. Install:
• Engine mount front "1"
• Engine mounting bolt/nut (front side) "2"
• Engine mounting bolt/nut (front lower side)
"3"
• Engine mounting bolt/nut (rear lower side) "4"
• Engine mount rear "5"
• Engine mounting bolt/nut (rear side) "6"
• Engine mount upper "7"
• Engine mounting bolt/nut (upper side) "8"
TIP
Do not fully tighten the bolts. (temporarily tight-
en.)
5
8
7
2. Tighten:
• Engine mount front bolt
• Engine mounting nut (front side)
Engine mount front bolt
35 Nm (3.5 m·kgf, 25 ft·lbf)
LOCTITE®
Engine mounting nut (front side)
64 Nm (6.4 m·kgf, 46 ft·lbf)
• Engine mounting nut (front lower side)
• Engine mounting nut (rear lower side)
Engine mounting nut (front lower
side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
Engine mounting nut (rear lower
side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
2
6
4
1
3
1
5-5
ENGINE REMOVAL
• Engine mount rear bolt
• Engine mounting nut (rear side)
Engine mount rear bolt
42 Nm (4.2 m·kgf, 30 ft·lbf)
Engine mounting nut (rear side)
60 Nm (6.0 m·kgf, 43 ft·lbf)
• Engine mount upper nut
• Engine mounting nut (upper side)
Engine mount upper nut
35 Nm (3.5 m·kgf, 25 ft·lbf)
Engine mounting nut (upper side)
35 Nm (3.5 m·kgf, 25 ft·lbf)
3. Install:
• Shift pedal "1"
Shift pedal bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP
The angle "b" of the shift pedal end must fall
within 6 with reference to the line passing
through "a" shown in the illustration.
b
b
1
a