Continuity
Positive tester probe sky blue
"1"
Negative tester probe
black/red "2"
Continuity
Positive tester probe sky blue
"1"
Negative tester probe
black/yellow "3"
No continuity
Positive tester probe
black/red "2"
Negative tester probe sky
blue "1"
No continuity
Positive tester probe
black/yellow "3"
Negative tester probe sky
blue "1"
Continuity
Positive tester probe
red/white "4"
Negative tester probe black
"5"
No continuity
Positive tester probe black
"5"
Negative tester probe
red/white "4"
2
1
4
5
A. Diode 1
B. Diode 2
3
B/Y B/R
Sb
R/W
B
ELECTRICAL COMPONENTS
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Disconnect the diode from the wire harness.
b. Connect the pocket tester ( 1) to the diode
terminals as shown.
c. Check the diode for continuity.
d. Check the diode for no continuity.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS28060
CHECKING THE SPARK PLUG CAP
1. Check:
• Spark plug cap resistance
Out of specification Replace.
Spark plug cap
Resistance
10.0 k
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the spark plug cap from the spark
plug lead.
b. Connect the pocket tester ( 1k) to the
spark plug cap as shown.
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
c. Measure the spark plug cap resistance.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS28090
CHECKING THE IGNITION COIL
1. Check:
• Primary coil resistance
Out of specification Replace.
Primary coil resistance
2.16–2.64
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Disconnect the ignition coil lead terminals
from the wire harness.
7-65