Configure External Printer; Configure Interface To Pc - Fluke NORMA 4000 Operator's Manual

NORMA 4000/5000
Operators Manual
In the General Setup menu, define the following settings:
Line
Printer
Syst IF
RS232
GPIB
LAN
The device can be equipped with an IEEE488 and Ethernet interface in addition to the
serial RS232 interface.

Configure External Printer

Settings
RS232
intern
On key
Off
Screen
Num
1/page
3/page
PCL
EPS 9p
EPS 24p
S/W
The PCL setting is suitable for most inkjet printers.
1. Move the cursor to the field with the value you wish to change, enter the new
2. Select the settings and confirm by pressing Enter.
7-6
Shop for Fluke products online at:
Configure printer

Configure interface to PC

Configure RS232 interface
Configure IEEE488 device address
Configure network (LAN) addresses and protocol
Print via RS232 interface on external printer or use internal printer
Printer activated
Printer deactivated
Print screenshot
Print numerical data
Print 1 screenshot per page
Print 3 screenshots per page
PCL printer
Epson 9-pin printer
Epson 24-pin printer
Printing color is black/white
value and confirm by pressing Enter.
The applied settings are shown in line Printer.
MyFlukeStore
www.
Function
Description
Note
.com
1.888.610.7664