Physical Fader Assignment (Optional Setup) - Chauvet Obey 10 User Manual

Physical Fader Assignment (OPTIONAL SETUP)

Use this feature to combine or unify fixture control attributes for different fixtures. For example; if
you were controlling 4 moving mirrors and 4 moving yokes, the color, gobo and dimmer channels
may not line up ideally on the physical faders. Use this function to re-assign the dimmer, color
and gobo channels to faders 1, 2 and 3. From now on you will be able to control the same
attributes on all fixtures using the same fader location.
Action ·
1) Press and hold PROGRAM & STEP/DIS
buttons together (1) time to access the
channel assignment mode.
2) Press a FIXTURE button that represents
the fixture whose faders you would like to
re-assign.
3) Move the SPEED fader until you arrive at
controller channel (number).
4) Move the FADE TIME fader to select the
DMX channel that you wish to move to.
5) Press the MUSIC/ADD button to confirm
setting. All FIXTURES LED indicators will
flash to confirm successful copy.
6) Repeat steps 3 ~ 5 as often as necessary.
If you wish to copy a scanner's physical
assignments to another scanner, continue by
following steps 7-13. If you do not wish to do
this, press PROGRAM and Step/Dis buttons
twice to exit the mode.
Example: Copying Scanner 1 into
1) Press and hold FIXTURE button # 1.
2) While holding button # 1 press FIXTURE
button # 2.
3) While holding FIXTURE buttons # 1 and #
2, press and hold MUSIC/ADD button.
4) Release SCANNER button # 1 first before
releasing SCANNER button # 2.
5) Release MUSIC/ADD button.
6) All FIXTURES LED indicators will flash to
confirm successful copy.
7) Press and hold PROGRAM & STEP/DIS
buttons (2) times to exit mode.
Obey 10 User Manual
Scanner 2
10
¥
Notes
All physical faders can be re-assigned to output
on a different DMX channel. Faders are given a
channel number and are labeled on the surface of
the controller as such.
Rev. 5