Changing Operating Mode - ZyXEL Communications WAP6804 User Manual

Chapter 3 Modes
Figure 5 Device Operating Mode Example
Note: Choose your device mode carefully to avoid having to change it later.

3.1.3 Changing Operating Mode

Push the CL/RP/AP switch on the WAP6804's side panel to the AP position to have the WAP6804 act as
an access point. Push the switch to the RP position to have the WAP6804 work as a repeater. Otherwise,
push the switch to the CL position to have the WAP6804 work as a wireless client.
Note: The WAP6804 restarts automatically after you change operating modes.
WAP6804 User's Guide
23