Telnet Screen - ZyXEL Communications WAP6804 User Manual

Figure 46 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 32 Maintenance > Firmware Upgrade
LABEL
Firmware Upgrade
File Path
Upload
Note: Do not turn off the WAP6804 while firmware upload is in progress!
Wait until the upgrade process is complete.
The WAP6804 automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 47 Network Temporarily Disconnected
After the WAP6804 restarts, log in again and check your new firmware version in the Status screen.

13.6 Telnet Screen

The WAP6804 can be managed either locally or remotely via a Telnet connection. You can use Telnet to
access the WAP6804's command line interface. Click Maintenance > Telnet.
Select Enable to allow users to access the WAP6804's CLI using Telnet and click Apply.
Chapter 13 Maintenance
DESCRIPTION
Click Choose file to find the.bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
WAP6804 User's Guide
77