HP FlexFabric 5700 Series Security Configuration Manual page 46

Step
3. Specify HWTACACS
authorization servers.
Specifying the HWTACACS accounting servers
You can specify one primary accounting server and a maximum of 16 secondary accounting servers for
an HWTACACS scheme. When the primary server is not available, the device searches for the
secondary servers in the order they are configured. The first secondary server in active state is used for
communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can function as the
primary accounting server of one scheme and as the secondary accounting server of another scheme at
the same time.
HWTACACS does not support accounting for FTP, SFTP, and SCP users.
To specify HWTACACS accounting servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
accounting servers.
Command
•
Specify the primary HWTACACS
authorization server:
primary authorization { host-name |
ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | single-connection ]
*
•
Specify a secondary HWTACACS
authorization server:
secondary authorization
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
accounting server:
primary accounting { host-name |
ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | single-connection ]
*
•
Specify a secondary HWTACACS
accounting server:
secondary accounting { host-name |
ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | single-connection ]
*
34
Remarks
By default, no authorization server
is specified.
Two HWTACACS authorization
servers in a scheme, primary or
secondary, cannot have the same
combination of hostname, IP
address, and port number.
Remarks
N/A
N/A
By default, no accounting server is
specified.
Two HWTACACS accounting
servers in a scheme, primary or
secondary, cannot have the same
combination of hostname, IP
address, and port number.