HP FlexFabric 5700 Series Security Configuration Manual page 163

Portal status: Enabled
Authentication type: Layer3
Portal Web server: newpt
Authentication domain: Not configured
Bas-ip: 20.20.20.1
User Detection:
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
IPv6:
Portal status: Disabled
Authentication type: Disabled
Portal Web server: Not configured
Authentication domain: Not configured
Bas-ipv6: Not configured
User detection: Not configured
Action for server detection:
Server type
--
Layer3 source network:
IP address
Destination authenticate subnet:
IP address
A user can perform portal authentication by using the HP iNode client or through Web page. Before
passing the authentication,
http://192.168.0.1 1 1:8080/portal and all Web requests will be redirected to the authentication page.
After passing the authentication, the user can access Internet resources.
# After the user passes authentication, use the following command to display information about the
portal user.
[SwitchA] display portal user interface vlan-interface 4
Total portal users: 1
Username: abc
Portal server: newpt
State: Online
Authorization ACL: None
VPN instance: --
MAC
0015-e9a6-7cfe
Not configured
Server name
--
Mask
Mask
Server name
--
the user
IP
8.8.8.2
151
can access only
VLAN Interface
4 Vlan-interface4
Action
--
Action
--
Prefix length
Prefix length
the authentication page