Userloginwithoui Configuration Example - HP FlexFabric 5700 Series Security Configuration Manual

NAS-ID profile is not configured
The output shows the following information:
The port security's limit on the number of secure MAC addresses on the port is 64.
•
• The port security mode is autoLearn.
The intrusion protection action is disabling the port (DisablePortTemporarily) for 30 seconds.
•
The port allows for MAC address learning, and you can display the number of learned MAC addresses
in the Current secure MAC addresses field.
# Display additional information about the learned MAC addresses.
[Device] interface ten-gigabitethernet 1/0/1
[Device-Ten-GigabitEthernet1/0/1] display this
#
interface Ten-GigabitEthernet1/0/1
port-security max-mac-count 64
port-security port-mode autolearn
port-security mac-address security sticky 0002-0000-0015 vlan 1
port-security mac-address security sticky 0002-0000-0014 vlan 1
port-security mac-address security sticky 0002-0000-0013 vlan 1
port-security mac-address security sticky 0002-0000-0012 vlan 1
port-security mac-address security sticky 0002-0000-0011 vlan 1
#
[Device-Ten-GigabitEthernet1/0/1] quit
# Verify that the port security mode changes to secure after the number of MAC addresses learned by the
port reaches 64.
[Device] display port-security interface ten-gigabitethernet 1/0/1
# Verify that the port will be disabled for 30 seconds after it receives a frame with an unknown MAC
address. (Details not shown.)
# After the port is re-enabled, delete several secure MAC addresses.
[Device] undo port-security mac-address security sticky 0002-0000-0015 vlan 1
[Device] undo port-security mac-address security sticky 0002-0000-0014 vlan 1
# Verify that the port security mode of the port changes to autoLearn, and the port can learn MAC
addresses again. (Details not shown.)

userLoginWithOUI configuration example

Network requirements
As shown in
device authenticates the client with a RADIUS server. If the authentication succeeds, the client is
authorized to access the Internet.
The RADIUS server at 192.168.1.2 functions as the primary authentication server and the secondary
•
accounting server. The RADIUS server at 192.168.1.3 functions as the secondary authentication
server and the primary accounting server. The shared key for authentication is name, and the
shared key for accounting is money.
All users use the authentication, authorization, and accounting methods of ISP domain sun.
•
Figure 68, a client is connected to the device through port Ten-GigabitEthernet 1/0/1. The
186