Reset Ipv6 Pathmtu - HP A5120 EI Series Command Reference Manual

Default level
2: System level
Parameters
all: Clears static and dynamic neighbor information on all interfaces.
dynamic: Clears dynamic neighbor information on all interfaces.
interface interface-type interface-number: Clears dynamic neighbor information on a specified interface.
slot slot-number: Clears dynamic neighbor information on a specified device in an IRF. If no IRF is formed,
only the dynamic neighbor information of the current device is cleared. The slot-number argument
indicates the member ID of the device.
If the switch does not support IRF, the slot-number argument must be 1.
static: Clears static neighbor information on all interfaces.
Description
Use the reset ipv6 neighbors command to clear IPv6 neighbor information.
You can use the display ipv6 neighbors command to display the current IPv6 neighbor information.
Examples
# Clear neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors all
# Clear dynamic neighbor information on all interfaces.
<Sysname> reset ipv6 neighbors dynamic
# Clear all neighbor information on VLAN-interface 1.
<Sysname> reset ipv6 neighbors interface GigabitEthernet 1/0/1

reset ipv6 pathmtu

Syntax
reset ipv6 pathmtu { all | static | dynamic }
View
User view
Default level
2: System level
Parameters
all: Clears all PMTUs.
static: Clears all static PMTUs.
dynamic: Clears all dynamic PMTUs.
Description
Use the reset ipv6 pathmtu the command to clear the PMTU information.
Examples
# Clear all PMTUs.
<Sysname> reset ipv6 pathmtu all
177