Ipv6 Nd Ra Halt; Ipv6 Nd Ra Interval - HP A5120 EI Series Command Reference Manual

Parameters
None
Description
Use the ipv6 nd proxy enable command to enable ND proxy.
Use the undo ipv6 nd proxy enable command to restore the default.
By default, ND proxy is disabled.
Examples
# Enable ND proxy on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd proxy enable

ipv6 nd ra halt

Syntax
ipv6 nd ra halt
undo ipv6 nd ra halt
View
Interface view
Default level
2: System level
Parameters
None
Description
Use the ipv6 nd ra halt command to enable RA message suppression.
Use the undo ipv6 nd ra halt command to disable RA message suppression.
By default, RA messages are suppressed.
Examples
# Suppress RA messages on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra halt

ipv6 nd ra interval

Syntax
ipv6 nd ra interval max-interval-value min-interval-value
undo ipv6 nd ra interval
View
Interface view
167