Proxy Arp Configuration Commands; Display Local-Proxy-Arp; Display Proxy-Arp - HP A5120 EI Series Command Reference Manual

Proxy ARP configuration commands

display local-proxy-arp

Syntax
display local-proxy-arp [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface interface-type interface-number: Displays the local proxy ARP status of the interface specified by
the argument interface-type interface-number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display local-proxy-arp command to display the status of the local proxy ARP.
If no interface is specified, the local proxy ARP status of all interfaces is displayed.
Related commands: local-proxy-arp enable.
Examples
# Display the status of the local proxy ARP on VLAN-interface 2.
<Sysname> display local-proxy-arp interface vlan-interface 2
Interface Vlan-interface2
Local Proxy ARP status: enabled

display proxy-arp

Syntax
display proxy-arp [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
10