To do...
Display statistics about TE for IS-IS
Display information about sub-TLVs
for the IS-IS TE extension
Display information about tunnels
Display the BFD information for an
MPLS TE tunnel
Display information about the
specified tunnels and their
protection tunnels
Clear the statistics about RSVP-TE
MPLS TE configuration examples
NOTE:
By default, Ethernet interfaces, VLAN interfaces, and aggregate interfaces are in DOWN state. To
configure such an interface, first use the undo shutdown command to bring the interface up.
MPLS TE using static CR-LSP configuration example
Network requirements
Switch A, Switch B, and Switch C run IS-IS.
Establish a TE tunnel using a static CR-LSP between Switch A and Switch C.
Use the command...
display isis traffic-eng statistics
[ process-id | vpn-instance
vpn-instance-name ] [ | { begin |
exclude | include }
regular-expression ]
display isis traffic-eng sub-tlvs
[ process-id | vpn-instance
vpn-instance-name ] [ | { begin |
exclude | include }
regular-expression ]
display tunnel-info { tunnel-id | all
| statistics } [ | { begin | exclude |
include } regular-expression ]
display mpls lsp bfd [ te tunnel
tunnel-number ] [ | { begin |
exclude | include }
regular-expression ]
display mpls te protection tunnel
{ tunnel-id | all } [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
reset mpls rsvp-te statistics { global
| interface [ interface-type
interface-number ]
81
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view