HP 12500 Series Configuration Manual page 364

To do...
Create a RIPng process for
an IPv6 VPN instance and
enter RIPng view
Redistribute the VPN routes
Configure the default cost
value for the redistributed
routes
Return to system view
Enter interface view
Enable the RIPng process on
the interface
NOTE:
For more information about RIPng, see
Configuring OSPFv3 between MCE and PE
To configure OSPFv3 between MCE and PE:
To do...
Enter system view
Create an OSPFv3
process for an IPv6
VPN instance and enter
OSPFv3 view
Set the router ID
Redistribute the VPN
routes
Configure a filtering
policy to filter the
redistributed routes
Return to system view
Enter interface view
Enable the OSPFv3
process on the
interface
NOTE:
For more information about OSPFv3, see
Use the command...
ripng [ process-id ] vpn-instance
vpn-instance-name
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | route-policy
route-policy-name ] *
default cost value
quit
interface interface-type interface-number
ripng process-id enable
Layer 3—IP Routing Configuration Guide
Use the command...
system-view
ospfv3 [ process-id ] vpn-instance
vpn-instance-name
router-id router-id
import-route protocol [ process-id |
allow-ibgp ] [ cost value | route-policy
route-policy-name | type type ] *
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ bgp4+ |
direct | isisv6 process-id | ospfv3
process-id | ripng process-id | static ]
quit
interface interface-type
interface-number
ospfv3 process-id area area-id
[ instance instance-id ]
Layer 3—IP Routing Configuration Guide
356
Remarks
Required
Required
By default, no route of any
other routing protocol is
redistributed into RIPng.
Optional
0 by default
—
—
Required
Disabled by default.
.
Remarks
—
Required
Required
Required
By default, no route of any other routing
protocol is redistributed into OSPFv3.
Optional
By default, redistributed routes are not
filtered.
—
—
Required
Disabled by default.
.