HP 12500 Series Configuration Manual page 267

172.1.1.0/24
172.1.1.1/32
172.2.1.0/24
[PE1] display ospf peer verbose
OSPF Process 1 with Router ID 1.1.1.9
Area 0.0.0.0 interface 172.1.1.1(Vlan-interface13)'s neighbors
Router ID: 172.1.1.2
State: Full
DR: 172.1.1.1
Dead timer due in 38
Neighbor is up for 00:02:44
Authentication Sequence: [ 0 ]
Neighbor state change count: 5
Configure basic MPLS and MPLS LDP on the MPLS backbone to establish LDP LSPs.
2.
# Configure PE 1.
[PE1] mpls lsr-id 1.1.1.9
[PE1] mpls
[PE1-mpls] quit
[PE1] mpls ldp
[PE1-mpls-ldp] quit
[PE1] interface vlan-interface 13
[PE1-Vlan-interface13] mpls
[PE1-Vlan-interface13] mpls ldp
[PE1-Vlan-interface13] quit
# Configure the P switch.
[P] mpls lsr-id 2.2.2.9
[P] mpls
[P-mpls] quit
[P] mpls ldp
[P-mpls-ldp] quit
[P] interface vlan-interface 13
[P-Vlan-interface13] mpls
[P-Vlan-interface13] mpls ldp
[P-Vlan-interface13] quit
[P] interface vlan-interface 12
[P-Vlan-interface12] mpls
[P-Vlan0interface12] mpls ldp
[P-Vlan-interface12] quit
# Configure PE 2.
[PE2] mpls lsr-id 3.3.3.9
[PE2] mpls
[PE2-mpls] quit
[PE2] mpls ldp
[PE2-mpls-ldp] quit
[PE2] interface vlan-interface 12
[PE2-Vlan-interface12] mpls
[PE2-Vlan-interface12] mpls ldp
Direct 0 0
Direct 0 0
OSPF 10 1
Neighbors
Address: 172.1.1.2
Mode:Nbr is Master
BDR: 172.1.1.2 MTU: 0
sec
259
172.1.1.1 Vlan13
127.0.0.1 InLoop0
172.1.1.2 Vlan13
GR State: Normal
Priority: 1