Reserved Station Specification - Mitsubishi Electric CC-Link IE Basic Reference Manual

7.2

Reserved Station Specification

This functions reserves a station (a station not actually connected but counted as a connected station) for future use. A
reserved station is not detected as a faulty station even though it is not actually connected.
Slave station 1 Slave station 2
*1 The station is not actually connected.
A reserved station is also included in the refresh range.
Setting method
Specify a slave station as a reserved station in the network configuration settings. ( Page 35 Network Configuration
Settings)
Items such as the number of occupied stations and IP address can be set for a reserved station.
Master station
Slave station 3
(reserved station)
*1
7.2 Reserved Station Specification
7
7 FUNCTIONS
33