1.8
Others
Reserved station setting
Reserved station is a slave station that is set in the parameters and included as a station in the network when its number is
counted. This station reserved for network extension in the future, and thus the station is not actually connected, and is not
detected as a faulty station despite being not connected. ( Page 117 "CC-Link IE TSN Configuration" Window)
By setting a reserved station, link device assignment will not change even if the slave station is connected (or the reservation
is cleared). Therefore, modification of the program is not required.
Error invalid station setting
An error invalid station is a slave station that is set to be not detected as a faulty station by the master station. It is also set
when a slave station is to be replaced during data link. ( Page 117 "CC-Link IE TSN Configuration" Window)
1 FUNCTIONS
90
1.8 Others