Mitsubishi Electric CC-Link IE Basic Reference Manual page 42

Refresh Settings
Set refresh parameters.
Window
Displayed items
Item
Link Side
CPU Side Target
Device Name
Points
Start
End
*1 These devices cannot be set for MELSEC iQ-F series modules.
8 PARAMETER SETTINGS
40
8.1 Settings for the Master Station in MELSEC iQ-R/MELSEC iQ-F
Description
The number of points for the link devices (RX/RY, RWr/RWw) for
the number of occupied stations and start/end device number set
in the network configuration settings are displayed.
The target destination to be link refreshed is displayed.
Set the device of the link refresh target.
The number of device points for the link refresh target is displayed.
(The same value as the number of points on the link side is
displayed.)
Set the start device number within the link refresh range.
The end device number within the link refresh range is displayed.
Setting range

Specify Device
*1 *1
X, Y, M, L, B, D, W, R, ZR , RD

Follow the device settings of the
CPU parameters. ( Each
user's manual)

Default

(Empty)
(Empty)

(Empty)
