Verifying The Erspan Configuration - Cisco Nexus 7000 Series Configuration Manual

Configuring ERSPAN
Step 6
Step 7
Step 8
Step 9
Step 10

Verifying the ERSPAN Configuration

To display the ERSPAN configuration, perform one of the following tasks:
Command
show monitor session {all | session-number | range
session-range} [brief]
show running-config monitor
show startup-config monitor
show resource monitor-session-extended
show resource monitor-session-mx-exception-src
For detailed information about the fields in the output from these commands, see the Cisco Nexus 7000 Series
NX-OS System Management Command Reference.
Command or Action
switch(config-erspan-src)# no
shut
switch(config-erspan-src)# exit
switch(config)# exit
switch# show monitor session
session-number
switch# copy running-config
startup-config [vdc-all]
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
Verifying the ERSPAN Configuration
Purpose
Enables the ERSPAN session. By default, the session is created
in the shut state.
Exits module configuration mode.
Exits global configuration mode.
(Optional)
Displays the status of ERSPAN sessions, including the
configuration status of the multicast best effort mode and the
modules on which the best effort mode is and is not supported.
(Optional)
Copies the running configuration to the startup configuration.
Purpose
Displays the ERSPAN session configuration.
Displays the running ERSPAN configuration.
Displays the ERSPAN startup configuration.
Displays the resources that are available for the
extended session.
Displays the resources that are available for the
exception session.
353