Chevrolet Corvette Owner's Manual page 59

Hide thumbs Also See for Corvette:
Table of Contents

Advertisement

58
Seats and Restraints
To stop manual recall movement,
release 1, 2, or
. Recall can also
be stopped by pressing a power
seat, SET, power mirror, or power
steering wheel control, if memory
equipped. The driver or passenger
side mirror must be selected.
Auto Memory Recall
The vehicle identifies the number of
the current driver's RKE transmitter
(1 8). See Remote Keyless Entry
(RKE) System Operation 0 26. If the
RKE transmitter is 1 or 2, and Auto
Memory Recall is programmed on in
vehicle personalisation, the
positions saved to the same
memory button number 1 or 2 are
automatically recalled when the
ignition is turned on, or turned from
off to ACC/ACCESSORY. RKE
transmitters 3 8 will not provide
automatic memory recalls.
To turn Auto Memory Recall on or
off, see "Vehicle Personalisation
Settings" previously in this section
and Vehicle Personalisation 0 125.
For vehicles equipped with an
automatic transmission, the
transmission must be in P (Park) to
initiate Auto Memory Recall. Auto
Memory Recall will complete if the
vehicle is shifted out of P (Park)
prior to reaching the stored memory
position.
For vehicles equipped with a
manual gearbox, the parking brake
must be set to initiate Auto Memory
Recall. Auto Memory Recall will
complete if the parking brake is
released prior to reaching the stored
memory position.
To stop Auto Memory Recall
movement, turn the ignition off or
press any of the following memory
controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel
If the stored memory seat position
does not automatically recall or
recalls to the wrong positions, the
driver's RKE transmitter number (1
or 2) may not match the memory
button number that positions were
saved to. Try storing the position to
the other memory button or try the
other RKE transmitter.
Easy Exit Recall
Easy Exit Recall is not linked to an
RKE transmitter. The position stored
to
is used for all drivers. To turn
Easy Exit Recall on or off, see
"Vehicle Personalisation Settings"
previously in this section and
Vehicle Personalisation 0 125.
If turned on, the positions saved to
are automatically recalled when
one of the following occurs:
The vehicle is turned off and the
driver's door is opened within a
short time.
The vehicle is turned off with the
driver's door open.
To stop Easy Exit Recall movement,
press any of the following memory
controls:
Power seat

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents