System (Abs) - Chevrolet Corvette Owner's Manual

Hide thumbs Also See for Corvette:
Table of Contents

Advertisement

The system is activated and
deactivated by pressing either of the
paddles marked REV MATCH on
the steering wheel. The system
must be activated with each new
ignition cycle. The system is
normally off.
A gear indicator in the instrument
cluster displays the current gear
selected:
When ARM is activated, the
gear number is amber.
When ARM is deactivated, the
gear number is white.
A white dash indicates that
service is required. ARM will be
disabled, and the malfunction
indicator lamp will be on. See
Malfunction Indicator Lamp
0 111. The clutch and manual
gearbox will continue to operate
normally.
ARM will also:
Be active above 25 km/h
(16 mph).
Match engine speed up to
5400 rpm.
Not operate when the
accelerator pedal is applied.
Be disabled when the coolant
temperature is below 0 °C
(32 °F).
Driving and Operating
Brakes
Antilock Brake

System (ABS)

This vehicle has an Antilock Brake
System (ABS), an advanced
electronic braking system that helps
prevent a braking skid.
When the vehicle begins to drive
away, ABS checks itself.
A momentary motor or clicking noise
may be heard while this test is going
on, and it may even be noticed that
the brake pedal moves a little. This
is normal.
If there is a problem with ABS, this
warning light stays on. See Antilock
Brake System (ABS) Warning Light
0 114.
187

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents