Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Call Duration Count Start Time
0 s
0-60 s
Specifies the length of time in seconds the system is to wait after
sending all dialling digits to the Central Office before starting the
call duration count.
Note
• The elapsed time of the call duration is shown on a display
PT.
• 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)
First Digit Time
10 s
5-120 s
Specifies the maximum time allowed between the start of an
outside dial tone and the first digit dialled on an outgoing call.
None
Inter-digit Time
5 s
1-30 s
Specifies the maximum time allowed between each digit on an
outgoing call.
Note
• This timer applies to the call until the Toll Restriction check
is completed.
None
System
81