Slt On-Hook With Consulting Held Call; Flash Button Operation While Co Talking; Flash Button Operation When "Don't Release Trunk" Is Selected At #3 - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

2. SLT On-hook with consulting held call

Consulting Hold
1.
Consulting Hold
2.
Disconnect
Specifies the result of pressing the switchhook lightly and then
replacing the handset during an outside call.
This setting applies to SLT users only.
• 1.10 Holding Features (F/G)
– Consultation Hold

3. FLASH button operation while CO talking

Release the trunk
1.
Release the trunk
2.
Don't release the trunk
Specifies the result of pressing the FLASH/RCL button on PT
during an outside call.
• 1.12 Conversation Features (F/G)
– External Feature Access
4. FLASH button operation when "Don't release
the trunk" is selected at #3
Disconnect and hear CO dial tone
1.
Disconnect and hear CO dial tone
2.
Sending EFA signal
Specifies the result of pressing the FLASH/RCL button on PT
during an outside call when "Don't release the trunk" is selected in
"3. FLASH button operation while CO talking."
• 1.12 Conversation Features (F/G)
– External Feature Access
System
93