Local Hunt Sequence; Trunk Group No. - Panasonic KX-TD500 Programming Manual

System

2.6 Local Hunt Sequence

Specifies the trunk group hunt sequence to be used when an extension user attempts to make
an outside call by dialling the feature number for "Local CO Line Access / ARS" or by pressing
a Loop-CO key.
Parameter
Default
Value Range
Description/Function
Reference
90

Trunk Group No.

01: 1, Others: None
None, 1-48
Specifies the trunk group (1-48) in hunting order.
Notes
• Local Hunt Sequence works only when ARS (Automatic
Route Selection) mode is turned off.
• The sequence can be used by any extension user in the
system regardless of the tenant but trunk groups will be
skipped if they do not belong to the same tenant as the
extension user.
• 1.6 Originating Features (F/G)
– Trunk Access
• 2.2.1 Basic Calling (U/M)
Programming Guide