Release Of Bri/Pri Line While On-Hold When 'Disconnect' Is Received; Sending Mode Of Clip While Clir Is Enabled - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
51. Release of BRI/PRI line while on-hold when
'DISCONNECT' signal is received
Release
1.
Release
2.
Don't Release
Specifies whether or not the system releases the ISDN BRI / PRI
line, when receiving the line disconnection message from the ISDN
Network while the line is placed on hold.
• 2.3 ISDN Answering Features (F/G)
– Malicious Call Identification (MCID)
• 2.7.15 Identifying Malicious Callers (Malicious Call
Identification [MCID]) (U/M)
• 2.5 System Timer (P/G)
– Auto Shut-off Time
52. Sending Mode of CLIP while CLIR is enabled (Q-Sig Line
only)
Private Network
1.
Private Network
2.
Public Network
Specifies the treatment of CLIP information when CLIR is set by
the extension user.
1.
Private Network:
The system does not send CLIP information to the ISDN Private
Network.
2.
Public Network:
The system sends CLIP information, which is not valid, to the
ISDN Public Network.
• 3.3 Network Service Features (F/G)
– Calling Line Identification Presentation (CLIP)
– Calling Line Identification Restriction (CLIR)
• 2.7.5 Displaying Your Number on the Called Party and Calling
Party's Telephone (Calling/Connected Line Identification
Presentation [CLIP/COLP]) (U/M)
• 2.7.6 Preventing Your Number Being Displayed on the Called
Party's Telephone (Calling Line Identification Restriction [CLIR])
(U/M)
System
113