Language Data; Uploading The Language Data To The Kx-Td500 System; System Programming - Panasonic KX-TD500 Programming Manual

2.9 Language Data

Display Language
The KX-TD500 System provides two different languages as the Display Language at the same
time, which is shown on the display of a Panasonic Proprietary Telephone (PT). Each PT
user can choose English (default) or Optional Language, so PTs on the same KX-TD500
System can display different languages.
Optional Language
French is stored as the default Optional Language at the factory.
You can replace French with one of the other optional languages.
Language Data File
If you want to use the Optional Language other than French, please upload the appropriate
Language Data File distributed with the PC System Programming Installation media.
< Uploading the Language Data to the KX-TD500 System >
1.
Start up the System in on-line mode.
2.
Connect the PC System Programming device (Windows
System and go into the Interactive mode.
3.
Point to "2-8 Language Data" from the "Programming - 2. System" drop-down
menu and click.
• The "Language Data Selection" dialogue box is displayed.
4.
Select the appropriate Language Data file and click
• Uploading of the Language Data from PC to the KX-TD500 System begins.
• Uploading takes about 5 minutes.
< System Programming >
When the uploading of the Language Data is finished;
1.
Go to "4-2 Extension Line" screen and choose "Option" in "Language" menu.
2.
Click
Notes
• The uploaded Language Data remains intact after the termination of system operation /
system reset.
• To clear the uploaded Language Data, set the Operation Switch (MODE) to the position
"5" and start up the system in off-line mode.
Programming Guide
or to save the data change.
PC) to the KX-TD500
®
.
System
119