Lexus CT200h Owner's Manual page 653

Start the engine of the second vehicle. Increase the engine
STEP 4
speed slightly and maintain at that level for approximately 5
minutes to recharge the battery of your vehicle.
Open and close any of the doors of your vehicle with the
STEP 5
"POWER" switch off.
Maintain the engine speed of the second vehicle and start the
STEP 6
hybrid system of your vehicle by turning the "POWER" switch
to ON mode.
Make sure the "READY" indicator light comes on. If the indica-
STEP 7
tor light does not come on, contact your Lexus dealer.
Once the hybrid system has started, remove the jumper cables
STEP 8
in the exact reverse order from which they were connected.
To install the engine cover, conduct the removal procedure in
STEP 9
reverse. After installing, check that the fixed pins are inserted
securely.
Once the hybrid system starts, have the vehicle inspected at your
Lexus dealer as soon as possible.
Starting the hybrid system when the 12-volt battery is discharged
■
The hybrid system cannot be started by push-starting.
To prevent 12-volt battery discharge
■
Turn off the headlights and the audio system while the hybrid system is off.
●
Turn off any unnecessary electrical components when the vehicle is running at a
●
low speed for an extended period, such as in heavy traffic.
CT200h_U (OM76040U)
5-2. Steps to take in an emergency
5
653