Using automatic mode
■
Fan speed is adjusted automatically according to the temperature setting and ambi-
ent conditions. As a result, the following may occur:
Immediately after the button is pressed, the fan may stop for a while until warm
●
or cool air is ready to flow.
Cool air may flow to the area around the upper body when the heater is on.
●
Humidity sensor (Canada only)
■
Using the system in recirculated air mode
■
The windows will fog up more easily if recirculated air mode is used.
Switching between outside air and recirculated air modes
■
Recirculated air mode or outside air mode may be automatically switched to in
accordance with the temperature setting and the inside temperature.
CT200h_U (OM76040U)
3-1. Using the air conditioning system and defogger
A sensor, which detects humidity inside the
vehicle and the temperature of the wind-
shield, is provided to detect fog on the front
windscreen. Due to the sensor, when auto-
matic mode is set the air conditioning may
make the following controls:
Changing the amount of air flow
●
Changing the amount of air introduced
●
from outside when in outside air mode with
the air vents in the
Changing the settings of the air vents to
●
when the
is set
3
position
297