Lexus CT200h Owner's Manual page 469

■ Programming a rolling code system (for U.S.A. owners)
If your device is rolling code equipped, follow the steps under the
heading "Programming HomeLink
steps listed below.
Locate the training button
STEP 1
opener motor. The exact location and color of the button may
vary by brand of garage door opener motor.
Refer to the operation manual supplied with the garage door opener
for the location of the training button
Press the training button
STEP 2
Following this step, you have 30 seconds in which to initiate step 3
below.
Press and hold the vehicle' s programmed HomeLink
STEP 3
2 seconds and release it. Repeat this step once again. The garage
door may open.
If the garage door opens, the programming process is complete. If the
door does not open, press and release the button a third time. This third
press and release will complete the programming process by opening
the garage door.
The ceiling mounted garage door opener motor should now recognize
the HomeLink
Repeat the steps above to program another rolling code system
STEP 4
for any of the remaining HomeLink
*
: Names such as "learn", "smart" or others vary according to manufac-
turer.
CT200h_U (OM76040U)
®
" before proceeding with the
*
on the ceiling mounted garage door
*
*
.
®
signal and operate the garage door.
3-7. Other interior features
.
®
button for
®
buttons.
3
469