Power (Ignition) Switch - Lexus CT200h Owner's Manual

2-1. Driving procedures

Power (ignition) switch

Performing the following operations when carrying the electronic key on
your person starts the hybrid system or changes "POWER" switch modes.
■
Starting the hybrid system
Check that the parking brake is set.
STEP 1
Firmly depress the brake pedal.
STEP 2
Check that the "POWER" switch indicator turns green. If the indica-
tor does not turn green, the hybrid system cannot be started.
When the shift position is N, the hybrid system cannot start. Shift the
shift position to P when starting the hybrid system. (P. 184)
STEP 3
Check that the "READY" indicator is on.
STEP 4
If the "READY" indicator changes from a flashing light to a solid light
and the buzzer sounds, the hybrid system is starting normally.
The vehicle will not move when the "READY" indicator is off.
The vehicle can move when the "READY" indicator is on even if the
engine is stopped. (The gasoline engine starts or stops automatically
in accordance with the state of the vehicle.)
CT200h_U (OM76040U)
Press the "POWER" switch.
Continue depressing the brake
pedal until the hybrid system is
completely started.
The hybrid system can be
started from any "POWER"
switch mode.
2
173